RadarCube on UserVoice

Possibility to place the second axis Y on the right side of the chart [updated]

2012-01-04T08:28:27-08:00

We need the possibility to arrange functions either bound to the first axis Y (placed on the left) or to the second axis Y (on the right) that differs from the first.

namtab said:

This is a rather frivolous aesthetics issue... RadarCube has other, more urgent issues...
Too bad this got this high amount of votes... It turns out looks are more important than utility to a lotta people...

Create a community forum [updated]

2012-01-04T08:21:26-08:00

Instead of the private ticket system a community forum will be an improvement

namtab said:

Tell me about it.. At least someone would respond to the outcries I've been putting out in those oh-so-ignored tickets....

RadarCube ASP.NET for MSAS: Cancel current (pending) operation

2012-01-04T08:19:11-08:00

namtab suggested:
Bring back AND actually render functional the "Cancel" button that should cancel the async request to the server associated with the current UI operation (drop cube element on grid, apply filter, etc...). The "Cancel" button SHOULDN'T make a full postback (as it did before it got removed), but should only abort the current async request e just stick with the current layout. This of course requires that RadarCube employs a data buffer mechanism before rendering to the UI, so as to allow the canceling of the data retrieval operation without affecting the UI. Of course I am referring to both the Silverlight and the HTML version of the control.

RIA Olap Grid: Add a "postpone olap grid update" option [updated]

2012-01-04T08:13:03-08:00

This is very important for us. Ours users build big queries and when they need to make several changes on it, on each change of layout or filter aplied over any dimension we have repeated updates on the data grid. That takes time. Our sugestion is to create a "postpone update" option, where users can mark this option and then do all the layout changes and filters without updating the grid. After finishing that, users can then click a button to update the "grid". See Microsoft´s Excel Pivot Table example.

namtab said:

This is truly necessary... Creating a simple layout on a cube with a lot of data can take an absurd amount of time just to set up. Users ultimately just abandon the page as the interface provides little feedback (one simple progress bar) and no possibility of canceling the current operation.

TOLAPGrid jQuery & jQueryUI alternative path

2012-01-04T08:04:19-08:00

namtab suggested:
The HTML version of RadarCube (TOLAPGrid class) employs jQuery & jQueryUI for improved dialog compatibility & rendering. It should be possible to specify a custom alternative path to the js and css files, as the RadarCube control may be integrated in a web app that already uses jQuery.

When a color range is applied to a measure, if the rank is included the color needs to be reversed

2011-10-10T17:34:43-07:00

Ryan suggested:
When you apply a color range to a measure (say red for lowest, green for highest) then add a row/column rank the color range for the rank needs to be reversed (so red for highest and green for lowest)

General ideas

2011-10-05T09:08:01-07:00

Roberto Alvarado suggested:
1. Show the "Cube Editor" for Microsoft Analysis Services in run time mode to share this feature with the end users because they needs to create their own hierarchies, and save the changes in the cube. 2. The "drill-across" functionality with your controls, we need to navigate in drill-across trough dimensions 3. A way to make a chart with the information that i have in the grid control, like "right clic make a chart". is like when i change something in my grid control, automatically refresh my changes in the chart.

Improve Filter functions.

2011-09-23T14:19:46-07:00

Luis Gilbert suggested:
When filtering a dimension by an attribute with a lot of members, the listbox option is cool, but there is no way to reduce the list box items. It should work just like Excel Filters which is a very commonly used way to filter data

after select the filter item example begins with (me) does not apply the filter autmaticlly

2011-08-23T17:16:06-07:00

mahmoud suggested:
as i have to select from muliple item begin with the same charchers so need the filter to return the items in the filter windows to select what i want from it not to return them in the report windows

Create a community forum

2011-08-04T05:36:13-07:00

frank suggested:
Instead of the private ticket system a community forum will be an improvement

Export from TOlapGrid to OpenOffice Calc format

2011-07-28T04:49:47-07:00

rsk suggested:
I would like to have ability to export data from TOlapGrid to OpenDocument (.ods) format.

fix the filter [updated]

2011-07-28T04:06:39-07:00

In OLAP Grid and Chart, it is too complicated to get a filter to select only one element. Especially when returning to the filter, you end up getting "all elements except: (long list here")

Radek said:

GUI (Hierarhy Editor) response time is too long in the case of bit larger hierarchy. In few cases an application looks like it was hanged.

Fix a bug of save/restore cube

2011-07-28T03:51:02-07:00

Radek suggested:
I'm testing save/load functionality of TOLAPGrid. It is realized acordingly by TOLAPGrid.SaveCompressed( vMemoStream, scAll ) and TOLAPGrid.Load( vMemoStream ) method. If there is no defined filters or one filter in first position on an axis, everything is OK, but in case where I have more then one filter defined, the TOLAPGrid.Load() method is working wrong - it can see only one filter. In other words, it works like I would define only one filter. The Filters in this text is ment as an hierarchy filters of TOLAPGrid.

New skin office 2010 like

2011-05-13T14:49:06-07:00

pedroah suggested:
New skin office 2010 like (Blue)

Progress bar while open a saved cube

2011-05-13T11:49:22-07:00

pedroah suggested:
Progress bar or and event to do our message telling the user wait.

Perfomance Improvements for RadarCube VCL

2011-04-04T07:25:05-07:00

Direct: Implement the end-user Formula Editor [is now completed]

2011-02-25T13:11:45-08:00

Direct-version od RadarCube allows creating the calculated hierarchy members and measures only programmatically. It prevents end-users from operating a powerful instrument for analysis. Is it possible to give end-users the option of creating formula-based calculated measures and hierarchy members directly in Runtime?

Direct: Implement the end-user Formula Editor [updated]

2011-02-25T13:11:45-08:00

Vladimir (admin) responded:

Implemented in RadarCube WinForms 2.50, ASP.NET 2.50, WPF 1.10

Direct: Implement the end-user Formula Editor [updated]

2011-02-17T16:34:55-08:00

pedroah said:

This is very important!!!!

RiaOlapGrid: Save layout with info about widths of user-ajusted columns [is now completed]

2011-02-15T06:01:52-08:00

Now user is allowed to resize columns but this info is not stored in layout files.

Direct: Implement the end-user Formula Editor [is now started]

2011-02-15T06:00:13-08:00

Respond to customer tickets in your support center [updated]

2011-01-06T11:33:21-08:00

I have bought RadarCube VCL and can not get support from your support center for over a month. You should better stop selling products which you cannot support.

Ben said:

Support need to be improved. Hire more ppl if you can't handle the number of support request. You guys also really need to fix actual bug in your product before adding new features !

Respond to customer tickets in your support center [updated]

2010-12-05T23:43:52-08:00

I have bought RadarCube VCL and can not get support from your support center for over a month. You should better stop selling products which you cannot support.

Saw Yih said:

same thing with ASP.net RadarCube grid, we have submit several ticket inside support side. however there is not respond at all.

RiaOLAPGrid MSAS actions with filter applied [is now declined]

2010-11-30T03:51:00-08:00

I propose that MSAS actions are not disabled when there is a filter in place. For example if you filter data in the RiaOLAP Grid and then right-click to access any of the actions defined on the cube, the context menu option dissapears. Considering the fact that many are using the RiaOLAP Grid as a web replacement of the BIDS cube browser implementation of this feature is imperative. At least provide the option not to hide the context menu option if the actions are disabled.

RiaOLAPGrid MSAS actions with filter applied [updated]

2010-11-30T03:51:00-08:00

Vladimir (admin) responded:

The problem is that this limitation is applied to RadarCube by the MSAS server, so, it looks like your question should be addressed to the Analysis Services developers.
You can try the same actions in Excel 2010 - and will face the same problems.

Implementing time intelligence [is now completed]

2010-11-30T03:45:19-08:00

Implementing time intelligence in context-menu to show growth from fixed period (not only previous/next). i.e. sales 2009 vs. 2008, 2007, 2006 Time intelligence is very important in BI to reach high level of usability for top-managers. Thanks!

Implementing time intelligence [updated]

2010-11-30T03:45:19-08:00

Vladimir (admin) responded:

You can do it yourself, please see here to know more:
http://support.radar-soft.net/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=80

Possibility to load a cube with a different query in SqlDataSource [is now completed]

2010-11-30T03:42:29-08:00

Possibility to load a cube with a different query in SqlDataSource [updated]

2010-11-30T03:42:29-08:00

Vladimir (admin) responded:

There has always been such an opportunity. As for the error - it looks like there's something wrong with your code. Please, create a ticket in Helpdesk.

Allow a user to view multiple cubes when RIA OLAP Grid is on a tab interface (javascript libraries). [is now completed]

2010-11-30T03:35:41-08:00

Current RIA OLAP Grid allows a user to view/open a single cube. On a tab interface such as on YUI, ExtJS, or JQuery, RIA OLAP Grid does not allow viewing of other cubes. It only allows viewing of the first cube connection. Subsequent connections to other cubes opens the same first connection.

Allow a user to view multiple cubes when RIA OLAP Grid is on a tab interface (javascript libraries). [updated]

2010-11-30T03:35:41-08:00

Vladimir (admin) responded:

Just close & reopen the Cube, like
TMDCube1.Active = false;
TMDCube1.ConnectionString = ...
TMDCube1.Active = true;

Make the OLAPCube (Direct) a Run-time component (ad-hoc) [updated]

2010-11-30T03:25:03-08:00

Let the final user points where they data are located (SSAS, .CUB, .XLS, .MDB, ODBC-*) and provide simple UI screens to define what is a measure/dimension/hierarchy. Or simply breaks dependency to Typed DataSets (or any other compiled data source) and read data structure directly.

Vladimir said:

Most likely, ad-hoc for RadarCube will be released separately, thought I cannot give you any definite date.
As for the binding to the typed dataset - we've never had that. You are free to use untyped dataset as you like.

Respond to customer tickets in your support center [updated]

2010-11-30T03:24:02-08:00

I have bought RadarCube VCL and can not get support from your support center for over a month. You should better stop selling products which you cannot support.

Vladimir said:

If you do not get any responce to your ticket in some reasonable time, please, actualize it by sending some additional information.

Make the OLAPCube (Direct) a Run-time component (ad-hoc) [updated]

2010-11-29T06:38:43-08:00

namtab00 said:

Get real!
Have you ever written a single line of code?

Respond to customer tickets in your support center [updated]

2010-11-29T06:37:21-08:00

I have bought RadarCube VCL and can not get support from your support center for over a month. You should better stop selling products which you cannot support.

namtab00 said:

...this is getting ridiculous, I have 5 open tickets for almost half a year now...

error input [is now declined]

2010-11-16T01:30:59-08:00

in the filter context, if we enter the error character,, it will cause the OLAPGRID crash,it seems lack of exception handle,this is a bug needed to be fixed.thank you.

error input [updated]

2010-11-16T01:30:59-08:00

in the filter context, if we enter the error character,, it will cause the OLAPGRID crash,it seems lack of exception handle,this is a bug needed to be fixed.thank you.

Vladimir (admin) responded:

Issue posted to the Helphesk.

ArgumentOutOfRangeException

2010-11-14T22:17:37-08:00

leo suggested:
In some cases, if i put one dimension into row area, and then expand it, after that, I put one measure into the measure area ,last, I put one calculated dimension into column area, it will cause the System.ArgumentOutOfRangeException,index was out of the range

Implement RadarCube in a pure WPF environment [is now completed]

2010-10-26T01:21:10-07:00

Implement RadarCube in a pure WPF environment [updated]

2010-10-26T01:21:10-07:00

Vladimir (admin) responded:

RadarCube for WPF has been released

RadarCube ASP.NET for MSAS : Erase button [is now completed]

2010-10-26T01:19:05-07:00

You should put a button somewhere in the toolbars that allow users, with a single click, to reset the grid (remove all filter, column, lines)

RadarCube ASP.NET for MSAS : Erase button [updated]

2010-10-26T01:19:05-07:00

You should put a button somewhere in the toolbars that allow users, with a single click, to reset the grid (remove all filter, column, lines)

Vladimir (admin) responded:

Implemented in 2.44.4

Filter multiple items from filter setting [is now completed]

2010-10-26T01:08:03-07:00

Filter multiple items from member filter setting. Filtering items from pagination is really hard because we have more than 50 pages to navigate

Filter multiple items from filter setting [updated]

2010-10-26T01:08:03-07:00

Filter multiple items from member filter setting. Filtering items from pagination is really hard because we have more than 50 pages to navigate

Vladimir (admin) responded:

Implemented in 2.45.0

how to expand all level at once? [is now completed]

2010-10-26T01:06:04-07:00

how to expand all level at once?

how to expand all level at once? [updated]

2010-10-26T01:06:04-07:00

how to expand all level at once?

Vladimir (admin) responded:

End-users are able to perform the drilling operation for all elements of the level through the context menu of the level header (select "Drill all down" subitems).

The drilling of the elements may be performed programmatically with the TOLAPGrid.Cellset.ExpandAllNodes or the ExpandAllHierarchies methods.

how to expand all level at once? [updated]

2010-10-26T01:04:41-07:00

how to expand all level at once?

Vladimir said:

End-users are able to perform the drilling operation for all elements of the level through the context menu of the level header (select "Drill all down" subitems).

The drilling of the elements may be performed programmatically with the TOLAPGrid.Cellset.ExpandAllNodes or the ExpandAllHierarchies methods.

how to expand all level at once? [updated]

2010-10-25T02:49:10-07:00

how to expand all level at once?

Haider said:

in radar cube please...

Possibility to load a cube with a different query in SqlDataSource [updated]

2010-09-09T06:51:15-07:00

GINA GOMEZ said:

Error:
Message: Referencia a objeto no establecida como instancia de un objeto.
SilverlightOLAPGrid: 2.44.4.10
TOLAPCube: 2.44.4.10

error when reloading the cube with a different query, the problem is that data in a temporary files folder
is there any solution for this?

display dimention type as currency

2010-07-20T05:00:19-07:00

harikrishna.bura suggested:
Toatal dispaly it as Rs